Sierra InnovaMass 240i Series, Instruction Manual, Page: 80 / 115

80
From here you can adjust instrument reference conditions . To adjust, press

again and the
units will begin flashing. As in previous examples, use the

buttons to enter the desired
value, and press enter

to save the value.
Once you are done press the enter key

to save. You can press the exit

several times to
climb back up to the main menu level or press

to proceed to the next Sub-Menu called
Diagnostics.
Change Password (Sub-Menu)
Use the Change Password (Sub-Menu) this menu to set or change a password. Navigate to the
Change Password (Sub-Menu).
A password is required to access the set-up sub menus. Press enter

and the four digit
password units will begin flashing. As in previous examples, use the

buttons to enter the
desired value, and press enter

to save the value.
The default password is 0000. If you have lost your password and can’t gain needed access to the
setup screens, you can contact our service department for a password that would allow you to
access the setup screens and setup a new password.
You can press the exit

several times to climb back up to the main menu level or press

to
proceed to the next Sub-Menu called Change Language.
Change Language (Sub-Menu)
Navigate to the Change Language (Sub-Menu).
Use Change Language (Sub-Menu) to change the displayed language of the meter. Use the SIP
program to download latest languages to your device. There are three language slots available.
You can press the exit

several times to climb back up to the main menu level or press

to
proceed to the next Sub-Menu called Restore Factory.
Change Password
1234
Change Language
US-English
Standard Temp.
70.000000 / F
Standard Press.
14.695949 / Psia
Normal Temp.
0.000 / C
Normal Press.
101.325/KPa A