Sierra InnovaMass 240i Series, Instruction Manual, Page: 58 / 115

58
Simulation Status: For the Flow and Frequency menus, use the

key to navigate to the
Simulation Status menu. Push the enter key

to change the status.
Simulate Value : For the Flow and Frequency menus, use the

key to navigate to the Simulation
Value menu. Push the enter key

and use

to edit the value.
Adjust Value:
For the Minimum Noise Level, Vortex Coefficient Ck, % FS Cutoff, and Output
Averaging menus, the value can be adjusted. Push the enter key

to begin editing. Use

to edit the value. When finished editing, push the enter key

again to save the value.
Autoset Value:
For the Minimum Noise Level and Vortex Coefficient Ck menus, the value can
be Autoset. Use

key to navigate to the Autoset window. Push the enter key

to autoset the
value. The new value will then be displayed.
Default Value:
For the Minimum Noise Level and Vortex Coefficient Ck menus, the value can
be reset to a default value. Use

key to navigate to the Default window. Push the enter key

to reset the value to default. The new value will then be displayed.
K-Factor is a calibration constant and cannot be adjusted.
Simulate Flow
Yes
Sim. Freq.
Yes
Flow ft3/m
100.0
Autoset Ck
21.2
Default Ck
20.0