Sierra Wireless MP 700 Series, Command Reference Manual

Page: 85 / 118

Command Reference
Rev 3.2 Oct.05 83
+CNMI (continued) New SMS message indications (continued)
<ds>
may be one of two values:
•
<ds>=0:
No SMS-STATUS-REPORTs returned
•
<ds>=1:
SMS-STATUS-REPORTs returned:
+CDS: <length><CR><LF>
<pdu data>
(PDU mode enabled)
or
+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (text mode enabled)
+<bfr>
may be one of two values:
•
<bfr>=0:
The modem’s buffer of unsolicited result codes is flushed to the
computer when
<mode>=1
,
2
, or
3
is entered. (
OK
is returned before
flushing the codes.)
•
<bfr>=1:
The modem’s buffer of unsolicited result codes is cleared when
<mode>=1
,
2
, or
3
is entered.
Note: See
+CMGL
(page 78–79) and
+CMGR
(page 79) for details on the
listed parameters.
+CNUM Retrieves the MSISDN from the SIM
Retrieves the MSISDN (Mobile Station International ISDN), or mobile phone
number, from the SIM.
The MSISDN can be edited in user interface software such as Watcher (the
AirCard enabling software).
Response parameters
The response to the +CNUM command has these parameters:
+CNUM:[<alpha>],<number1>,<type1>[,<speed>,<service>[,<itc]]
[<CR><LF>+CNUM:[<alpha2>],<number2>,<type2>[,<speed>,<service>
[,<itc>]][...]]
<alpha
x
>
is an optional alphanumeric string associated with
<numberx>
. (This
can be edited in the user interface software (such as Watcher, the AirCard
enabling software). (The character set used is that set with the command
+CSCS
. See page 93.)
<number
x
>
is a string type phone number of the format specified by
<typex>
.
<type
x
>
is the type of octet in integer format. (Refer to GSM 04.08 subclause
10.5.4.7. This specification is listed on page 8.)
Continued on next page.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description