Sierra Wireless MP 700 Series, Command Reference Manual

Page: 32 / 118

MP 700 Series GPS AT Command Reference
30 2130309
!MPGPSINTSET Set GPS update interval 45
!MPGPSNMEA Set NMEA messages 46
!MPGPSRESET Reset GPS module 46
!MPGPSST Request GPS status 47
!MPGPSSTOR Enable / disable storing and forwarding of GPS
records 48
!MPGPSTAIP Set / query TAIP messages sent in RNAP 48
!MPGPSTRACK Set / query GPS tracking for MT reporting 49
!MPGRESET Reset the MP and the PC Card module 49
!MPGVER Query current firmware revision 49
!MPIDTIME Sets the inactivity timeout 50
!MPIGNSENSE Report ignition status 50
!MPMTCONF Configure MT protocol 50
!MPNVDEF Set modem configuration parameters to defaults 51
!MPOPMODE Select operating mode 52
!MPPADCONF PAD configuration 52
!MPPADCONN[n] Establish PAD connection 54
!MPPADSETUP Set up a PAD connection 54
!MPPDDELAY Set power down timer 55
!MPPRIVIP Set the private IP address 55
!MPSETDFLT Set the default GPRS profile 55
!MPSETUP Configure a GPRS profile 56
!MPSIMSLED Report the status of the SIM sled 56
!MPUSB Enable / disable USB operation 57
!MPWATCHER Enable / disable NAT support 57
Table 3-8: Sierra Wireless modem control commands
Command Description p.