Sierra Wireless MP 700 Series, Command Reference Manual

Page: 95 / 118

Command Reference
Rev 3.2 Oct.05 93
+CSCA=<sca>
[,<tosca>]
+CSCA?
SMS service center address
Updates the SMSC (SMS Service Center) address, through which mobile
originated SMS messages are transmitted from the modem. The setting is used
in both PDU and text modes.
Note:
<sca>
must be set before SMS messages can be sent.
<sca> is a string indicati
ng the service center address, as a GSM 04.11 RP SC
address Address-Value field in string format; BCD numbers (or GSM default
alphabet characters) are converted to characters.
The type of address is given by
<tosca>
, which is optional. if it is not specified,
when the first character of the phone number is + (IRA 43), the default is
145
;
otherwise the default is
129
.
+CSCA?
returns the current setting.
+CSCS
[=<string>]
+CSCS?
Character set
Tells the modem which character set is used by the connected computer. The
modem can then convert character strings correctly between the character sets
in use on the two devices.
This command is available for querying and to support GSM standards only.
The Sierra Wireless modem supports only the GSM standard character set,
<string>=GSM
, which is the GSM default alphabet (GSM 03.38 subclause
6.2.1).
+CSCS?
returns the current setting.
+CSDH=<n>
+CSDH?
Show SMS text mode parameters
Controls whether detailed header information is shown in SMS text mode result
codes. <n> can be one of two values:
•
<n>=0:
Do not show responses with optional parameters (detailed headers).
•
<n>=1:
Show responses with optional parameters.
+CSDH?
returns the current setting.
+CSMP[=<fo>]
[,<vp>][,<pid>]
[,<dcs>]
+CSMP?
Set SMS text mode parameters
In SMS text mode, this command selects values for additional parameters
needed when an SMS message is sent to the network or stored in memory.
It is possible to set the validity period
<vp>
starting from when the message is
received by the SMSC (
<vp>
as an integer between 0–255, default 167) or
define the absolute time of the validity period termination (
<vp>
as a time string).
The format of
<vp>
is given by
<fo>
.
Continued on next page.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description