Sierra Wireless MP 700 Series, Command Reference Manual

Page: 79 / 118

Command Reference
Rev 3.2 Oct.05 77
PDU mode:
+CMGC=
<length>
or
Text mode:
+CMGC=<fo>,
<ct>[,<pid>]
[,<mn>][,<da>]
[,<toda>]
Note: Also see the
+CMGS
command on
page 80.
Send SMS command
Sends an SMS Command message from the host computer to the network
(SMS-COMMAND). The message reference value
<mr>
is returned (as
+CMGC: <mr>
) to the host computer if the message is successfully delivered,
and can be used to identify the message if an unsolicited delivery status code is
received.
How the command is used depends on the SMS message format specified in
+CMGF
(page 78):
•
In PDU mode (
+CMGF=0
), messages are sent as follows:
+CMGC=<length><CR>
<PDU data>
<CTRL+Z>
•
In text mode (
+CMGF=1
), messages are sent in this form:
+CMGC=<fo>,<ct>,<pid>,<mn>,<da>,<toda><CR>
<message text>
<CTRL+Z>
Note: In both modes, sending
<ESC>
instead of
<CTRL+Z>
quits without
sending the message.
Supported values
Parameters for the text-mode send command are:
•
<fo>
first octet of GSM 03.40 SMS-COMMAND in integer format (default
2)
•
<ct>
GSM 03.40 TP-Command-Type in integer format (default 0)
•
<pid>
GSM 03.40 TP-Protocol-Identifier in integer format (default 0)
•
<mn>
GSM 03.40 TP-Message-Number in integer format
•
<da>
GSM 03.40 TP-Destination-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted to characters; type of address given by
<toda>
•
<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet in
integer format (when first character of
<da>
is + (IRA 43) default
is 145, otherwise default is 129)
For PDU mode:
•
<length>
integer type value indicating the length of the actual TP data unit
in octets (i.e. the RP layer SMSC address octets are not counted
in the length)
+CMGD=<index> Delete SMS message
Deletes the
<index>
-numbered message from the currently selected memory
store. (See
+CMGS
, page 80).
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description