Sierra Wireless MP 700 Series, Command Reference Manual

Page: 84 / 118

MP 700 Series GPS AT Command Reference
82 2130309
+CNMI=<mode>
[,<mt>][,<bm>]
[,<ds>][,<bfr>]
+CNMI?
New SMS message indications
Sets or queries how the computer is notified of new messages when the
modem is active.
<mode>
controls the processing of unsolicited result codes,
<mt>
sets the result code indication routing for SMS-DELIVERs,
<bm>
for
CBMs and
<ds>
for SMS-STATUS-REPORTs.
<bfr>
defines the handling
method for buffered result codes when
<mode>=1
.
+CNMI?
returns the current settings. The default is
+CNMI=1,0,0,0
.
Supported values
<mode>
may be one of four integer values:
•
<mode>=0:
Buffer unsolicited result codes in the modem. If the buffer is full,
the oldest codes are replaced with the new received codes.
•
<mode>=1:
Discard indication and reject new received message unsolicited
result codes when the modem-computer link is reserved (e.g. in online data
mode); otherwise forward them directly to the computer.
•
<mode>=2:
Buffer unsolicited result codes in the modem when in online
data mode, and flush them to the host computer after reservation. Otherwise
forward them directly to the modem.
•
<mode>=3:
Forward unsolicited result codes directly to the host computer.
<mt>
may be one of four values:
•
<mt>=0:
No SMS-DELIVER indications.
•
<mt>=1
: If SMS-DELIVER is stored in the modem, indication of the memory
location is routed to the host computer using the unsolicited result code:
+CMTI: <mem>,<index>
•
<mt>=2
: Indication of SMS-DELIVER is returned using unsolicited result
codes:
+CMT: <alpha>,<length><CR>
<pdu>
(in PDU mode)
or
+CMT: <oa>,<alpha>,<scts>,<tooa>,<fo>,<pid>,
<dcs>, <sca>,<tosca>,<length><CR>
<data>
(in text mode)
•
<mt>=3
: Class 3 SMS-DELIVERs are routed directly to the most computer
using unsolicited result codes defined in
<mt>=2
. Messages of other classes
result in the indication as defined in
<mt>=1
.
<bm>
may be one of two values:
•
<bm>=0:
No CBM indications are routed to the host.
•
<bm>=1:
New CBMs are routed directly to the host using unsolicited result
code:
+CBM: <length><CR><LF>
<pdu data>
(PDU mode enabled)
or
+CBM: <sn>,<mid>,<dcs>,
<page>,<pages><CR><LF>
<message text>
(text mode enabled)
Continued on next page.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description