Sierra Wireless MP 700 Series, Command Reference Manual

Page: 61 / 118

Command Reference
Rev 3.2 Oct.05 59
&W
Store user-defined profile
Saves current configuration settings into non-volatile memory. When the
modem is reset or powered off and on, these settings are restored.
This only saves settings configured with these commands: ATE , ATV , ATQ ,
ATL , ATM , ATX , and AT&C .
The settings stored using
AT&W
can also be restored using the
ATZ
command
(see page 103). The
AT&F
command (see page 58) returns the modem to the
factory default settings (see page 107).
+CBST=<speed>[,<na
me>][,<ce>]
+CBST?
+CBST=?
Select bearer service type
Sets the data rate
<speed>
, bearer service
<name>
, and connection element
<ce>
to be used when originating a GSM data call. The query command
+CBST?
returns current values;
+CBST=?
returns supported values.
Supported values
Available values are:
•
data rate
<speed>=
0 autobauding (automatic data rate selection)
1 300 bps (V.21)
2 1200 bps (V.22)
3 1200/75 bps (V.23) 4 2400 bps (V.22bis)
5 2400 bps (V.26ter) 6 4800 bps (V.32)
7 9600 bps (V.32) 12 9600 bps (V.34)
14 14400 bps (V.34) 65 300 bps (V.110)
66 1200 bps (V.110) 68 2400 bps (V.110/X.31)
70 4800 bps (V.110/X.31) 71 9600 bps (V.110/X.31)
75 14400 bps (V.110/X.31)
•
bearer service
<name>=
0 data circuit asynchronous (UDI or 3.1 kHz modem)
2 PAD Access (asynchronous) (UDI)
•
connection element
<ce>=
0 transparent
1 non-transparent
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description