Sierra Wireless MP 700 Series, Command Reference Manual

Page: 83 / 118

Command Reference
Rev 3.2 Oct.05 81
+CMGS (continued) Send SMS message (continued)
The text in
<message text>
is sent to the address
<da>
.
<toda>
is optional—
when the first character of the phone number is “+” (IRA 43), it will default to
145; otherwise the default is 129.
Note: In both modes,
<CTRL+Z>
(IRA 26) sends the message.
<ESC>
(IRA
27) quits without sending.
Sending SMS messages requires that the service center be configured using
+CSAS . (See page 27.)
Supported values
See
+CMGL
(page 78–79) and
+CMGC
(page 77) for details on the listed
parameters.
+CMGW=
<length>,
<status><CR>
<pdu>
(PDU mode)
or
+CMGW
[=<oa/da>]
[,<tooa/toda>]
[,<status>]<CR>
<data>
(text mode)
Write SMS message to memory
Saves the SMS message (either SMS-DELIVER or SMS-SUBMIT) to the
message store. If successful, the memory location
<index>
of the stored
message is returned in the form
+CMGW: <index>
.
By default, message status will be set to “stored unsent” (
<status>=2
or
STO
UNSENT
), but another
<status>
may be assigned, as described on page 78.
The ending of the message body (in text mode) or PDU (in PDU mode) must be
indicated by
<ctrl-Z>
(IRA 26). Saving can be cancelled by passing the
<ESC>
character (IRA 27).
Supported values
See
+CMGL
(page 78–79) for details on the listed parameters.
Note: When storing an SMS-DELIVER to the message store in text mode,
<vp>
can be substituted for
<scts>
(see
+CSMP
, page 93).
+CMSS=<index>
[,<da>][,<toda>] Send SMS message from storage
Sends the message with location value
<index>
from the message store to the
network (SMS-SUBMIT).
<da>
and
<toda>
are optional—if new values are
provided, they will be used instead of the
<da>
stored with the message and the
default
<toda>
.
A message reference value
<reference>
is returned if the message has been
successfully delivered, in the form
+CMSS: <reference>
. It can be used to
identify the message if an unsolicited delivery status report result code is
returned.
Supported values
See
+CMGL
(page 78–79) for details on the listed parameters.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description