Siemens Synova FC330A, Manual

Page: 134 / 136

Fire Safety & Security Products
Building Technologies 1583_o_en_−−_9
130
08.2005
9.6 Evolution FC330A
Supported Peripheral Devices ph1 ph1a ph2 ph3 ph4
conventional detectors x x x x
OPxxxx / HIxxxx / OHxxxx / MTxxxx x x x x
DO1133 − x x x
DF1191 / 92 − x x x
EB322A only as technical alarm x x x x
EB322A / AB322A / ABI322A / DC1192 − x x x
CB320A − − x x
B3Q580 / B3Q59x − − x x
K3I050 with B3R051 / K3R072 − − x x
K3I110 – – – x
3rd party system via serial port (BMS) − − x x
printer via serial port x x x x
Table of Quantitiy ph1 ph1a ph2 ph3 ph4
addressable stub lines 4 4 4 2/4
addressable loop 2 2 2 1/2/4
addressable detectors / input devices ..256 ..256 ..256 ..512
addressable output devices − ..64 ..64 ..64
conventional lines 4 / 12 4 /12 4 / 12 4/12
logical detector zones ..256 ..256 ..256 ..512
logical control zones − ..64 ..128 ..128
bus devices on LON−bus − − ..16 ..16
floor repeater and control panels (B3Q5xx) − − ..16 ..16
remote output device (K3I050) – – ..8 ..16
remote I/O device (K3I110) – – – ..16
outputs on LON-bus − − ..256 ..256
internal programmable inputs − 4 4 4
sounder control lines 2 + 2 2 + 2 + 2 2 + 2 + 2 2 + 2 + 2
internal LED outputs (32) 32 32 32
Important Functions ph1 ph1a ph2 ph3 ph4
configuration tool SWE330A − x x x x
visualizer for demo / training x x x x x
application warning with DO1131A /DOT1131A − − x x x
2
nd
alarm within zone with/without new alarm − − x x x
individual programming of control outputs − − x x x
individual disabling of control outputs − − x x x
zone type ‘blank’ − − x x x
command ACK with or without password − − − x x
programmable delay for power failure − − − x x
supporting character sets ’Cyrillic’ − − − x 1) x 1)
supporting character sets ’Hebrew’ − − − x 2) x 2)
1) only supported with FC330A-6 but ’Cyrillic’ is not supported with B3Q580 and B3Q59x
2) only supported with FC330A-5 but ’Hebrew’ is not supported with B3Q580 and B3Q59x