Siemens SINUMERIK 840D Page 587 Operating Manual Download

Page: 587 / 610

Alarms, error messages, and system alarms

20.4 PLC and NC variables

Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0

587

20.4.3

Loading PLC symbols

PLC data can also be edited via symbols.
To do this, the symbol tables and texts for the symbols in the PLC project must have been

suitably prepared (STEP7) and made available in SINUMERIK Operate.

Preparing PLC data
Save the generated files in the /oem/sinumerik/plc/symbols directory.

Procedure

The variable view is opened.

Press the ">>" and "Load icons" softkeys.
The "Import PLC symbols: *.snh" window opens.

In the folder "/oem/sinumerik/plc/symbols", select the "PlcSym.snh"

file to import the symbols and then click on "OK".

In the folder "/oem/sinumerik/plc/symbols", select the "PlcSym.snt" file

to import the symbols and then press the "OK" softkey.

You will obtain an appropriate note if the tables were successfully

imported.

Press the "OK" softkey.
You return to the "NC/PLC variables" window.

Restart the SINUMERIK Operate in order to activate the files.

Summary of Contents for SINUMERIK 840D



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK 840D

Reviews:

Related manuals for SINUMERIK 840D

Brands by name

Popular brands

Siemens SINUMERIK 840D, Operating Manual

Search results

Summary of Contents for SINUMERIK 840D

Reviews:

Related manuals for SINUMERIK 840D

Brands by name

Popular brands