manualshive.com logo in svg

Siemens SINUMERIK 840D, Operating Manual, Page: 561 / 610

Share
Download
Siemens SINUMERIK 840D Operating Manual Download Page 561

 

Ladder Viewer and Ladder add-on (828D only) 

 

19.3 Control options 

Milling 
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0 

561

 

Screen element  Display 

Meaning 

6 

Focus 
Performs the tasks of the cursor 

7 

Information line 
Displays information, e.g. for searching 

19.3

 

Control options 

In addition to the softkeys and the navigation keys, there are further shortcuts in this area. 

Shortcuts 

The cursor keys move the focus over the PLC user program. When the window borders are 

reached, scrolling is performed automatically. 

 

Shortcuts 

Action 

 

 

 

To the first column of the row 

 

 

 

To the last column of the row 

 

Up a screen 

 

Down a screen  

 

 

 

 

One field to the left, right, up or down 

 

 

-or- 

To the first field of the first network 

Summary of Contents for SINUMERIK 840D



































































































































































































































































































































































































































































































































































































































Reviews:

No comments