Siemens SINUMERIK 840D Operating Manual Download Page 533

Page: 533 / 610

Setting up drives

14.2 Setting up drives

Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0

533

Entry

Meaning

sk_usb_front.png

Icon file name. Is displayed on the softkey.

sk_local_drive.png

Icon file name. Is displayed on the softkey.

Text file

slpmdialog

Text context

SlPmDialog

File for softkey dependent on the language. If nothing is

specified in the input fields, the text appears on the softkey as

was specified in the input field "Softkey text".
If your own text files are saved, then the text ID, which is used

to search for the text file, is specified in the "Softkey text" input

field.

User name
Password

Enter the user name and the corresponding password for

which the directory is enabled on the server. The password is

displayed in encoded form as as string of "*" characters and is

stored in the "logdrive.ini" file.

Error messages

Error message

Meaning

Error occurred when closing a connection

An existing drive was not able to be deactivated.

Error occurred when establishing a connection.

Drive connection was not able to be established.

Error occurred while establishing a connection:

Incorrect entry or no authorization.

Drive connection was not able to be established.

Incorrect data

The entered data are either incorrect or

inconsistent.

Function not available

The function is not supported with the current

software release.

Unknown error - error code:%1

Error was not able to be assigned.

Procedure

Select the "Start-up" operating area.

Press the "HMI" and "Log. drive" softkeys.
The "Set Up Drives" window opens.

Select the data for the corresponding drive or enter the necessary

data.

Summary of Contents for SINUMERIK 840D



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK 840D

Reviews:

Siemens SINUMERIK 840D, Operating Manual, Page: 533 / 610

Search results

Summary of Contents for SINUMERIK 840D

Reviews: