Siemens SINUMERIK 840D Page 582 Operating Manual Download

Page: 582 / 610

Alarms, error messages, and system alarms

20.4 PLC and NC variables

Milling

582

Operating Manual, 03/2010, 6FC5398-7CP20-1BA0

Proceed as follows

Select the "Diagnosis" operating area.

Press the "Messages" softkey.
The "Messages" window appears.

20.4

PLC and NC variables

20.4.1

Displaying and editing PLC and NC variables

The "NC/PLC variables" window allows NC system variables and PLC variables to be

monitored and changed.
You receive the following list in which you can enter the desired NC/PLC variables in order to

display the actual values.
●

Variable
Address for NC/PLC variable
Incorrect variables have a red background and are displayed with a # character in the

value column.

●

Comment
Any comment on the variable.
The columns can be displayed and hidden.

●

Format
Specify the format in which the variable is to be displayed.
The format can be specified (e.g. floating point)

●

Value
Displays the actual value of the NC/PLC variables

Summary of Contents for SINUMERIK 840D



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK 840D

Reviews:

Related manuals for SINUMERIK 840D

Brands by name

Popular brands

Siemens SINUMERIK 840D, Operating Manual

Search results

Summary of Contents for SINUMERIK 840D

Reviews:

Related manuals for SINUMERIK 840D

Brands by name

Popular brands