Par. No.
Name
Range
Default
Unit
P0013[16]
User defined parameter
0 - 65535
0
--
Defines a limited set of parameters to which the end user will have access right.
Index:.
P0013[0]
1st user parameter
P0013[1]
2nd user parameter
…
P0013[15]
16th user parameter
Dependency:
To prevent changes to user-defined parameter, set P0011 ("lock") to a different value than P0012 ("key").
When locked and the user-defined parameter is activated, the only way to exit the user-defined parameter
(and view other parameters) is to set P0012 ("key") to the value in P0011 ("lock")
Note:
● Alternatively, set P0970 = 48 (factory reset) to perform a factory reset of all parameters and selected
connection macro or set P0970 = 49 (factory reset) to perform a factory reset of all parameters (except
parameters for quick motor data settings) and selected connection macro.
● The default values of P0011 ("lock") and P0012 ("key") are the same
r0018[2]
Inverter version display
--
--
--
Displays firmware version number of the inverter or the operator panel
r0018[0]:
Inverter firmware version
r0018[1]:
Firmware version of the operator panel
r0024
Actual Inverter output frequency
--
--
Hz
Displays actual output frequency. Slip compensation, resonance damping and frequency limitation are
included.
r0025
Actual output voltage
--
--
V
Displays [rms] voltage applied to motor.
r0026
Actual DC-link voltage
--
--
V
Displays DC-link voltage.
r0027
Actual output current
--
--
A
Displays [rms] value of motor current [A].
r0037
Inverter temperature [°C]
--
--
°C
Displays internal inverter heatsink temperature.
Parameter list
SINAMICS V10
80
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
