Features
● Main characteristics
– Easy installation and commissioning, simple cable connection
– Can be operated on TNC, TNS, TT or IT mains systems
– A comprehensive range of parameters enabling configuration for a wide range of simple
applications
– Compact design for fast installation
– High switching frequencies for low-noise motor operation
● Performance characteristics
– Fast Current Limitation (FCL) for normal operation under sudden load changes
– Built-in DC braking mode
– Compound braking to improve braking performance
– V/f control with linear characteristic
– V/f control with Flux Current Control (FCC)
– V/f control with parabolic characteristic
– Acceleration/deceleration times with programmable smoothing
– Integrated PI controller for simple process control
● Protection characteristics
– Short-circuit protection
– Over-current protection
– Inverter and motor over-temperature protection
– Over-voltage and under-voltage protection
– Load-side ground fault protection
– Motor blocking protection
– Parameter interlock
Description
SINAMICS V10
14
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
