Siemens SINAMICS MV 9LD4110-7EX70-1AA0 Operating Instructions Manual Download

Page: 75 / 154

3. Pay attention to the center of gravity imprinted on the box

②

and the imprinted position of

the ropes

③

4. Carefully raise the transportation unit.

①

Spreader beam

②

Center of gravity

③

Imprinted position of the rope

Figure 4-9

Transporting a transportation unit (still in packaging) with a crane

4.4.8

Transporting a cooling unit

Refer to the operating instructions of the re-cooling unit for notes relating to transport and
storage.

NOTICE
Damage to the ion exchange cartridge as a result of frost

If the ion exchange cartridge is exposed to frost, it may be damaged.
• Only transport and store the ion exchange cartridge in non-frosty conditions. More

information is available in the re-cooling unit's operating instructions.

Preparations for use

4.4 Transportation

3rd Party LCI Control Upgrade
Operating Instructions, 02/2022, A5E31872818

Summary of Contents for SINAMICS MV 9LD4110-7EX70-1AA0



























































































































































Search results

Summary of Contents for SINAMICS MV 9LD4110-7EX70-1AA0

Reviews:

Related manuals for SINAMICS MV 9LD4110-7EX70-1AA0

Brands by name

Popular brands

Siemens SINAMICS MV 9LD4110-7EX70-1AA0, Operating Instructions Manual

Search results

Summary of Contents for SINAMICS MV 9LD4110-7EX70-1AA0

Reviews:

Related manuals for SINAMICS MV 9LD4110-7EX70-1AA0

Brands by name

Popular brands