Siemens Sinamics GM150 6SL3835-2LN44-2AA0, Operating And Installation Instructions

Page: 113 / 238

8.3.2 Configuration of the AOP30 operator panel
8.3.2.1 Define operation screen
Depending on the type of drive, an operation screen with ten different display parameters is the
default.
9(&7252))
9B'&
9 ,B,7 $HII
$867 )B2)) +]
3:,5. N: /7,7
7B/7 r& ,',67 $HII
,4,67 $HII 8B2)) 9HII
+HOS
FKDQJH 6HO3DU 'LDJ
Figure 8-4 Example of the operation screen
You can customize the display of the operation screen. The following types of display are
available:
● Values
– 2 digital values
– 10 values
The order of the entries in this screen determines the order of the operating variables
(parameters) displayed in the operation screen.
● Bars
– 3 bars
● Mixed
– 8 values / 1 bar
– 4 values / 2 bars
Order of the display: First the parameters to be displayed digitally and then the
parameters to be displayed as bars.
Defining the operation screen
1. Press the <Change> function key. The "Operation screen" menu opens.
ႱႧ
Ⴍ
'HILQHRSHUDWLRQVFUHHQ
2SHUVFUHHQW\SH
6FUHHQW\SH
6FUHHQW\SH
+HOS
%DFN
ႱႧ
&KDQJH
YDOXHV%DUV
ႱႧ
$FWLYH
2. Press the <▲> or <▼> function key to select the "Screen 2" entry. Then press the <Change>
function key to change the "Active" setting.
Operation
8.3 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
113