Siemens SIMOTION TB30 Manual Download Page 45

Page: 45 / 150

Operator control (hardware)

2.3 7-segment and LED displays

SIMOTION D4x5-2
Manual, 02/2012

Note
While the SIMOTION D4x5-2 is ramping up, all LEDs are briefly illuminated in yellow.

7-segment display

The 7-segment display provides further status information in addition to the LED displays.
The status "6" and a flashing "." indicate that the D4x5-2 has ramped up and communication

has been established to the SINAMICS Integrated.

Additional information

You can perform a detailed diagnosis with a PG/PC and the engineering system. Information

on the

Diagnostics via LED displays can also be found in the SIMOTION D4x5-2

Commissioning and Hardware Installation Manual and in the online help of this section via

the link under the

Instructions menu.

Summary of Contents for SIMOTION TB30























































































































































Search results

Summary of Contents for SIMOTION TB30

Reviews:

Related manuals for SIMOTION TB30

Brands by name

Popular brands

Siemens SIMOTION TB30, Manual

Search results

Summary of Contents for SIMOTION TB30

Reviews:

Related manuals for SIMOTION TB30

Brands by name

Popular brands