Operator control (hardware)
2.2 Operator controls
SIMOTION D4x5-2
42
Manual, 02/2012
Service selector switch
The following table shows the possible positions of the Service selector switch. The Service
selector switch positions are explained in the order in which they are arranged on the
SIMOTION D4x5-2.
Table 2- 3
Switch positions of the Service selector switch
Service mode
Selector position Meaning
-
0
No service/diagnostic functions activated (default setting).
Delete/restore
non-volatile
SIMOTION data
1
When the "Delete/restore non-volatile SIMOTION data" switch
setting is selected, the non-volatile data of the D4x5-2 is first
deleted and then restored along with the contents of the
PMEMORY backup file.
Downgrade
(device update
tool)
B
SIMOTION D4x5-2 control units and projects can be
upgraded using upgrade data created at an earlier point in
time. This upgrade data is generated with the device update
tool (Menu: "Project>Start device update tool" in SIMOTION
SCOUT).
If the upgrade process fails to bring about the desired result,
the upgrade can be rejected by means of the switch position.
This will roll the system back to the previous configuration.
Backup of
diagnostic data
and non-volatile
SIMOTION data
D
The diagnostic data and non-volatile SIMOTION data can be
backed up in STOP, STOPU, and RUN state. The advantage
of backing up in RUN state is the availability of enhanced
diagnostic information (via websites) and TO alarm
information.
Note
Alternatively, diagnostic data and non-volatile SIMOTION data can also be backed up via the
DIAG button, see Section DIAG button (Page 43).
Additional references
Detailed information on the individual topics can be found in the following table:
Table 2- 4
References
Subject
Reference
Setting of the operating modes
•
SIMOTION SCOUT
Configuration Manual
Upgrading devices (device update tool)
•
Upgrading SIMOTION Devices
Operating
Instructions and
•
SIMOTION D4x5-2
Commissioning and
Hardware Installation Manual
•
Creating diagnostic data and
•
Saving/restoring non-volatile SIMOTION data
•
SIMOTION D4x5-2
Commissioning and
Hardware Installation Manual
Summary of Contents for SIMOTION TB30
