Siemens SIMOTION TB30 Manual Download Page 23

Page: 23 / 150

Description

1.4 Representation of SIMOTION D425-2 DP and D435-2 DP

SIMOTION D4x5-2
Manual, 02/2012

CAUTION

SIMOTION D425-2 DP and D435-2 DP must be operated with a double fan/battery module

for heat dissipation. Without this module, the Control Units will not start up and cannot be

commissioned.

Information on how to install the double fan/battery module can be found in "Supplementary

system components", in Section Installing the fan/battery module (Page 95).

Note
SIMOTION D425-2 DP and D435-2 DP are supplied with pre-assembled spacers. They can

be removed if necessary.
For further details, see the

SIMOTION D4x5-2 Commissioning and Hardware Installation

Manual.

Summary of Contents for SIMOTION TB30























































































































































Search results

Summary of Contents for SIMOTION TB30

Reviews:

Related manuals for SIMOTION TB30

Brands by name

Popular brands

Siemens SIMOTION TB30, Manual

Search results

Summary of Contents for SIMOTION TB30

Reviews:

Related manuals for SIMOTION TB30

Brands by name

Popular brands