Supplementary system components
6.4 CBE30-2 Ethernet communication board
SIMOTION D4x5-2
Manual, 02/2012
111
6.4.5
LED displays
Position of the LEDs
The X1400 interface with the four ports has integrated LEDs for displaying the link and the
activity for each port. The front panel of the board is also fitted with two LEDs (Fault and
Sync), which indicate the bus status.
Table 6- 15 Meaning of the LED displays
LED
Meaning
link
... indicates whether a different device is connected to port x and a physical
connection exists
Activity
... indicates whether data is being received or sent at port x
Sync
... indicates the synchronization status of the PROFINET IO interface
Fault
... indicates a fault state of the PROFINET IO interface
Additional references
Detailed information on the states of the status LEDs can be found in the
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, Section
Diagnostics.
Summary of Contents for SIMOTION TB30
