manualshive.com logo in svg

Siemens SIMOTICS CONNECT 600, Operating Instructions Manual

Share
Download
Siemens SIMOTICS CONNECT 600 Operating Instructions Manual Download Page 61

Deleting system-related data on the IPC using a script

1. Create a backup copy of the data storage medium for the IPC.

2. Activate the service mode (Page 42).

3. On the IPC desktop, open the "Troubleshooting" folder.

4. Select script "21_wipe_all_dsc_data_secure".

5. In the shortcut menu, execute command "Run as administrator".

The operation may take several minutes.
Data are securely deleted according to the NCSC-TG-025 standard of the National Computer 
Security Center.

Deleting data of the components in the sensor box

CPU SIMATIC S7-1212C DC/DC/DC
1. Reset the CPU to the factory settings. To do this, follow the instructions in the CPU 

documentation (Page 16).

SIPLUS CMS1200 SM1281
1. Delete all device data. To do this, follow the instructions provided in the component 

documentation (Page 16) (keyword, "Data cleansing").

Maintenance

9.11 Deleting the data of the connectivity module

Operating Instructions, 06/2020

59

Summary of Contents for SIMOTICS CONNECT 600

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands