Siemens Simatic S7-1500 CPU 1512C-1 PN User Manual Download Page 47

Page: 47 / 206

Technology functions

3.1 High-speed counters

CPU 1512C-1 PN (6ES7512-1CK01-0AB0)
Manual, 12/2017, A5E40898741-AA

3.1.2

Configuring the high-speed counters

3.1.2.1

General

You configure the high-speed counters (HSC) in STEP 7 (TIA Portal).
The functions are controlled by the user program.

Reference

A detailed description of configuring the counting and measuring functions can be found in:

●

S7-1500, ET 200MP, ET 200SP Counting, measurement and position detection

(

http://support.automation.siemens.com/WW/view/en/59709820

) function manual

●

in the STEP 7 online help under "Using technology functions > Counting, measuring and

position detection > Counting, measuring and position detection (S7-1500)"

A detailed description of configuring Motion Control be found in:

●

S7-1500 Motion Control (

http://support.automation.siemens.com/WW/view/en/59381279

)

function manual

●

in the STEP 7 online help under "Using technology functions > Motion Control > Motion

Control (S7-1500)"

3.1.2.2

Assignment of the control interface of the high-speed counters

The user program uses the control interface to influence the behavior of the high speed

counter.

Note
Operation with High_Speed_Counter technology object
The High_Speed_Counter technology object is available for high-speed counting mode. We

therefore recommend use of the High_Speed_Counter technology object instead of the

control interface/feedback interface for controlling the high speed counter.
For information on configuring the technology object and programming the associated

instruction, refer to the S7-1500, ET 200MP, ET 200SP Counting, measurement and position

detection (

http://support.automation.siemens.com/WW/view/en/59709820

) function manual.

Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN















































































































































































































Search results

Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN

Reviews:

Related manuals for Simatic S7-1500 CPU 1512C-1 PN

Brands by name

Popular brands

Siemens Simatic S7-1500 CPU 1512C-1 PN, User Manual

Search results

Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN

Reviews:

Related manuals for Simatic S7-1500 CPU 1512C-1 PN

Brands by name

Popular brands