Documentation guide
CPU 1512C-1 PN (6ES7512-1CK01-0AB0)
12
Manual, 12/2017, A5E40898741-AA
SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to perform commissioning and maintenance
activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of
the TIA Portal.
General function overview:
●
Network browsing and creation of a table showing the accessible devices in the network.
●
Flashing of device LEDs or HMI display to locate a device
●
Downloading of addresses (IP, subnet, gateway) to a device
●
Downloading the PROFINET name (station name) to a device
●
Placing a CPU in RUN or STOP mode
●
Setting the time in a CPU to the current time of your PG/PC
●
Downloading a new program to a CPU or an HMI device
●
Downloading from CPU, downloading to CPU or deleting recipe data from a CPU
●
Downloading from CPU or deleting data log data from a CPU
●
Backup/restore of data from/to a backup file for CPUs and HMI devices
●
Downloading service data from a CPU
●
Reading the diagnostics buffer of a CPU
●
Performing a CPU memory reset
●
Resetting devices to factory settings
●
Downloading a firmware update to a device
You can find the SIMATIC Automation Tool on the Internet
https://support.industry.siemens.com/cs/ww/en/view/98161300
PRONETA
With SIEMENS PRONETA (PROFINET network analysis), you analyze the PROFINET
network during commissioning. PRONETA features two core functions:
●
The topology overview independently scans PROFINET network and all connected
components.
●
The IO check is a fast test of the wiring and the module configuration of a system.
You can find SIEMENS PRONETA on the Internet
Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN
Page 1: ......
