Siemens Simatic S7-1500 CPU 1512C-1 PN User Manual Download Page 20

Page: 20 / 206

Product overview

2.2 Hardware properties and firmware functions

CPU 1512C-1 PN (6ES7512-1CK01-0AB0)

Manual, 12/2017, A5E40898741-AA

2.2

Hardware properties and firmware functions

The CPU 1512C-1 PN consists of a CPU part, an analog on-board I/O module (X10) and a

digital on-board I/O module (X11 and X12). When configured in the TIA Portal, the compact

CPU therefore occupies a single shared slot (slot 1).
The properties and functions of the CPU part and the analog and digital on-board I/O

modules can be found in the subsections below. The properties describe the hardware

features of the CPU part and the analog and digital on-board I/O modules. The functions

describe the functions of the firmware of the CPU part and the analog and digital on-board

I/O modules.

Article number

6ES7512-1CK01-0AB0

Accessories

The following accessories are included in the scope of delivery and can also be ordered

separately as spare parts:

●

3 x front connector (push-in terminals) including cable ties

●

3 x shield clamp

●

3 x shield terminal

●

3 x infeed element (push-in terminals)

●

3 x labeling strip

●

3 x universal front cover

For more information on accessories, refer to the S7-1500, ET 200MP system manual

(

http://support.automation.siemens.com/WW/view/en/59191792

Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN















































































































































































































Search results

Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN

Reviews:

Related manuals for Simatic S7-1500 CPU 1512C-1 PN

Brands by name

Popular brands

Siemens Simatic S7-1500 CPU 1512C-1 PN, User Manual

Search results

Summary of Contents for Simatic S7-1500 CPU 1512C-1 PN

Reviews:

Related manuals for Simatic S7-1500 CPU 1512C-1 PN

Brands by name

Popular brands