Siemens Simantic ET 200S Manual Download

Page: 48 / 274

Digital electronic modules

3.2 Parameters of the Digital Electronic Modules

ET 200S

3-4

Manual, Edition 10/2005, A5E00514527-01

3.2

Parameters of the Digital Electronic Modules

3.2.1

Hardware interrupt

This parameter enables the hardware interrupts for the module.

3.2.2

Input delay

This parameter can be used to suppress signal interference. Changes in the signal are only

detected if they remain stable for longer than the configured input delay time.

3.2.3

Trigger for hardware interrupt, rising edge

This parameter can be be used to enable a hardware interrupt with rising edge (a signal

status change) by channel.

Summary of Contents for Simantic ET 200S



















































































































































































































































































Search results

Summary of Contents for Simantic ET 200S

Reviews:

Related manuals for Simantic ET 200S

Brands by name

Popular brands

Siemens Simantic ET 200S, Manual

Search results

Summary of Contents for Simantic ET 200S

Reviews:

Related manuals for Simantic ET 200S

Brands by name

Popular brands