Additional units
10.1 SIDOOR SERVICE TOOL
ATE500E
146
System Manual, 09/2017, A5E33917696-AD
Operating principle
Action
Key
Remarks
1 Select required parameter
2 Activate parameter for setting using the
Return key
Parameter value flashes
3 Increase or decrease parameter value
4 Accept parameter value by pressing
Return key again
Displayed parameter value stops
flashing after acceptance.
5
•
Select next parameter
(See step 1)
•
Exit menu
Parameter changes
Note
Parameter changes are accepted with the door at a complete stop or in the OPEN or
CLOSED position.
WARNING
Risk of injury due to moving mechanical parts
After parameters have been changed, the permitted energies and forces have to be
checked by service staff and adjusted if they exceed their limit values. This has to be done
on the heaviest door in the entire system with the shaft door and cabin door coupled.
Menu navigation
You can find a guide to the menus of the SIDOOR SERVICE TOOL in the section Navigation
