Further notes
You can reset the setting to the default with the
no ip igmp snooping port-purge-
interval
command.
You can display the status of this function and other information with the
show ip igmp
snooping globals
command.
8.2.2.7
no ip igmp snooping port-purge-interval
Description
With this command, you reset the setting for the purge time to the default value.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip igmp snooping port-purge-interval
Result
The purge time is reset to the default value.
Further notes
You configure the setting with the
ip igmp snooping port-purge-interval
command.
You can display the status of this function and other information with the
show ip igmp
snooping globals
command.
8.2.3
Commands in the VLAN configuration mode
This section describes commands that you can call up in the VLAN Configuration mode.
In the Global Configuration mode, enter the
vlan $$$
command to change to this mode.
When doing this, you need to replace the
$$$
placeholders with the relevant VLAN ID.
Layer 2 management protocols
8.2 IGMP snooping
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
384
Configuration Manual, 07/2017, C79000-G8976-C361-06