You exit the Global configuration mode with the
end
or
exit
command and are then in the
Privileged EXEC mode again.
3.4.3.1
auto-save
Description
The CLI can save changes to the configuration automatically.
If you first want to test changes made to the configuration so that you can discard them
afterwards if necessary, you can disable the auto save function.
You are then in the Trial mode.
Changes to the configuration that you have not saved, are indicated by an asterisk in front of
the command prompt:
*cli(...)#
.
You save the changes to the configuration with the
write startup-config
command.
With the
auto-save
command, you enable the auto save function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
auto-save
As default the function is "enabled".
Result
The auto save function is enabled.
Further notes
You save changes to the configuration in the Trial mode with the
write startup-config
command.
You disable the function with the
no auto-save
command.
You can display the status of this function and other information with the
show device
information
command.
Configuration
3.4 Configuration Save & Restore
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
108
Configuration Manual, 07/2017, C79000-G8976-C361-06
