![Siemens S5-135U System Manual Download Page 120](http://html.mh-extra.com/html/siemens/s5-135u/s5-135u_system-manual_377341120.webp)
4-54
System Manual
C79000-G8576-C199-06
6ES5 955-3NC42
6ES5 955-3NF42
Safety Specifications
The power supply units comply with safety specifications VDE 0805 /
EN 60950 / IEC 950 / VDE 0160 and VDE 0106 Part 101.
Shock protection
only ensured in the installed state.
Data for EMC in the installed state
See technical specifications of the S5-135U/155U CC
Safe electrical separation
is ensured.
1)
Input
Rated input voltage
(including ripple)
24 V DC (19.2 - 33 V)
24 V DC (19.2 - 33 V)
Input current I
i/p
at rated load and rated V
i/p
= 24 V
9.5 A
20 A
Polarity reversal protection
yes
yes
Reak inrush current I
i/pmax
100 A for 1
m
s
200 A for 1 ms
I
@
t value of inrush current
2.7 A
@
s
18 A
@
s
Efficiency at rated load (with fans) and
V
i/p
¢
24V
0.60
0.67
Max. heat dissipation at rated load
(with fans) at V
o/p1
, V
o/p2
, V
o/p3
90 W
153 W
Efficiency at rated load (without fans) and
V
i/p
¢
230/120 V AC
0.65
0.70
Max. heat dissipation (without fans)
66 W
129 W
Stored energy time during power failure
at rated load and V
i/p
¢
19.2 V DC
(adjustable)
>20 ms
20 ms
5 ms
>20 ms
20 ms
5 ms
Input fuse
Littlefuse 322020, 220 A
@
s
Littlefuse 322030, 620 A
@
s
Extenal battery supply
4.5 V
4.5 V
Output 1
Rated output voltage V
o/pN1
5.1 V DC
$
1.2%
5.1 V DC
$
1.2%
Rated output current I
o/pN
18 A
40 A
Basic load
0.5 A
1.6 A (typical)
3.1 A (worst case)
Ripple
v
1% of V
o/p1
v
1% of V
o/p1
Spikes
v
4% of V
o/p1
v
4% of V
o/p1
Static voltage tolerances
–
at 95% load variation
–
at 15% variation of V
i/p
–
at temperature variation / 1K
v
0.08% of V
o/p1
v
0.0005% of V
o/p1
v
0.02% of V
o/p1
v
0.08% of V
o/p1
v
0.0005% of V
o/p1
v
0.02% of V
o/p1
Dynamic voltage tolerances
at load surge from 50% to 100% I
o/pN
–
overshoot
–
settling time*
v
3% of V
o/p1
v
5 ms
v
3% of V
o/p1
v
5 ms
1)
These power supply units have a separation between the input circuit (24 VDC) and the secondary circuit which fulfills the
requirements for 230 VAC.
Central Controllers and Expansion Units Power Supply Units
Summary of Contents for S5-135U
