Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
236
Configuring Port Security
Parameter
Description
MAC Address
Synopsis:
##-##-##-##-##-## where ## ranges 0 to FF
Authorized MAC address learned by the switch.
VID
Synopsis:
0 to 65535
VLAN Identifier of the VLAN upon which the MAC address operates.
Sticky
Synopsis:
{ No, Yes }
This describes whether the authorized MAC address/Device can move
to another port or not:
• YES - authorized MAC address/Device cannot move to a different
switch port
• NO - authorized MAC address/Device may move to another switch
port
If a MAC address is not listed, do the following:
• Configure port security. For more information, refer to
Section 5.9.3, “Configuring Port Security”
.
• Configure IEEE 802.1X. For more information, refer to
Section 5.9.4, “Configuring IEEE 802.1X”
.
Section 5.9.3
Configuring Port Security
To configure port security, do the following:
1. Navigate to
Network Access Control
»
Port Security
»
Configure Ports Security
. The
Ports Security
table
appears.
Figure 167: Ports Security Table
2. Select an Ethernet port. The
Ports Security
form appears.
