Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
204
Adding a Security-to-Group Map
1
Figure 134: SNMP Security to Group Maps Table
1.
InsertRecord
2. Click
InsertRecord
. The
SNMP Security to Group Maps
form appears.
6
4
5
3
2
1
Figure 135: SNMP Security to Group Maps Form
1.
Security Model Box
2.
Name Box
3.
Group Box
4.
Apply Button
5.
Delete Button
6.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
SecurityModel
Synopsis:
{ snmpV1, snmpV2c, snmpV3 }
Default:
snmpV3
The Security Model that provides the name referenced in this
table.
Name
Synopsis:
Any 32 characters
The user name which is mapped by this entry to the specified
group name.
Group
Synopsis:
Any 32 characters
The group name to which the security model and name belong.
This name is used as an index to the SNMPv3 VACM Access Table.
4. Click
Apply
.
