Chapter 5
Setup and Configuration
RUGGEDCOM ROS
User Guide
142
Configuring VLANs Globally
4
5
3
2
1
Figure 82: Global VLAN Parameters Form
1.
VLAN-aware Options
2.
Ingress Filtering Options
3.
QinQ Outer TPID options
4.
Apply Button
5.
Reload Button
2. Configure the following parameter(s) as required:
Parameter
Description
VLAN-aware
Synopsis:
{ No, Yes }
Default:
Yes
Set either VLAN-aware or VLAN-unaware mode of operation.
Ingress Filtering
Synopsis:
{ Disabled, Enabled }
Default:
Disabled
Enables or disables VLAN ingress filtering on all ports. When
enabled, any tagged packet arriving at a port, which is not
a member of a VLAN with which that packet is associated, is
dropped. When disabled, packets are not dropped.
NOTE
Ingress filtering has no effect when ports are in
either VLAN-unaware mode or Q-in-Q mode.
QinQ Outer TPID
Synopsis:
{ 0x8100, 0x88A8 }
Default:
0x8100
Selects an Ethertype to be used as the Tag Protocol Identifier
(TPID) on VLAN QinQ ports when QinQ is enabled. Frames that
ingress a VLAN QinQ port will be identified as outer VLAN tagged
if the first Ethertype matches this value; an outer VLAN tag with
the TPID field assigned to this value will be inserted to frames that
egress a VLAN QinQ port.
NOTE
When QinQ is enabled, all non-QinQ ports will be
untagged and cannot be changed, and all QinQ
ports will be tagged, and cannot be changed.
3. Click
Apply
.
