Siemens OpenStage Key Module Operation Manual Download Page 66

Page: 66 / 215

Step by step

Enhanced phone functions

During a call

Call waiting with DSS key

Prerequisite:

DSS keys are configured on your phone

Page 24 and

Page 104. The line of the party you

wish to call is busy.

Press the DSS key.

The called party accepts your waiting call.

Lift the handset.

Press the key and enter speakerphone mode

[1]

Using the second call feature

You can specify whether you wish to accept a second call
(call waiting) during a call.

Activating/deactivating second call

Open the program/service menu

Page 43.

Select and confirm the option shown.

Confirm.

Select and confirm the option shown.

[1] Pay attention to the notes on voice encryption

Page 126.

For information on the meanings of the LED dis-
plays of the DSS keys, see

Page 24.

If your phone belongs to an ONS group (parallel
call

Page 160), please note the following:

In addition to an alert tone on the busy phone,
the second call is signaled with a ring tone on the
other phones in the ONS group.

Feature settings?

Camp-on?

Activate?

Deactivate?

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands