Siemens OpenStage Key Module Operation Manual Download Page 78

Page: 78 / 215

Step by step

Enhanced phone functions

System-wide speaker call

You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.

Speaker call to a variable destination

Prerequisite:

You have programmed the function

"Speaker call-one-way" on a key

Page 100.

Lift the handset.

Press the key and enter speakerphone mode.

Press the "Spkr. 1-way" programmed sensor key.

Enter the internal number of the party.

A connection is immediately established to this destina-
tion station’s loudspeaker if

•

the station is not busy

•

the handset has not been lifted

•

"Speaker call protect" is not activated

The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.

The called party can accept the connection by lifting the
handset.

If the called party presses the speaker key

or the line

key (if configured)

, the connection is lost.

Speaker call to a fixed destination

Prerequisite:

The system code for "Speaker call-one-

way" and the destination number are programmed on
the repdial key

Page 103.

Press the programmed repdial key. A connection to the
destination loudspeaker is immediately established.

The same number of speaker calls and normal
connections is possible.

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands