Siemens OpenStage Key Module Operation Manual Download Page 55

Page: 55 / 215

Basic functions

Step by step

Switching to the held party
(alternating)

Prerequisite:

You are conducting a consultation call.

if nec.

g :

Open the context menu

Page 32.

Select and confirm the option shown.
You are switched to the party on hold

[1]

Ending an alternate operation

Select and confirm the option shown.
The active call is disconnected and the held call is re-
stored.

Combine the calling parties into a three-party
conference

Select and confirm the option shown.

An alert tone signals that a conference call has been es-
tablished between all three parties.

Toggle?

[1] Pay attention to the notes on voice encryption

Page 126.

Release and return?

Conference?

If voice encryption is not activated or not avail-
able on a conference party’s phone, the entire
conference is not secure. It may be indicated that
the call is not secure

Page 126.

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands