Siemens OpenStage Key Module Operation Manual Download Page 70

Page: 70 / 215

Step by step

Enhanced phone functions

Establishing a conference

Initiating a conference from a single call

[

You are conducting a call.

Select and confirm the option shown.

Call the second party.
Inform this party that you are initiating a conference.

Confirm.
The following message is displayed: "1 is your position".

Establishing a conference from a consultation call

You are connected to a party and call a second party.

Select and confirm the option shown.

Call the second party.
Inform this party that you are initiating a conference.

Select and confirm the option shown.
The following message is displayed: "1 is your position".

Establishing a conference from a second call

Prerequisite:

You are conducting a call and receive a

second call

Page 67.

[

You are conducting a call.

An alert tone is audible.

Press the "Pickup" sensor key.

or Only if a "Pickup" sensor key is not configured:

Select and confirm the option shown.

[

You are immediately connected to the second caller.
The other party is placed on hold.

Select and confirm the option shown.
The following message is displayed: "1 is your position".
All parties are connected to a single conference.

If voice encryption is not activated or not avail-
able on a conference party’s phone, the entire
conference is not secure. It may be indicated that
the call is not secure

Page 126.

Start conference?

Conference?

Consultation?

Conference?

Answer camp-on?

Conference?

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands