Siemens OpenStage Key Module Operation Manual Download Page 63

Page: 63 / 215

Enhanced phone functions

Step by step

Using a personal phonebook

For a detailed description of this function, see

Page 36.

Saving phonebook entries

Page 113.

Calling a contact from the phonebook list

Press the key shown until the "Personal" tab is active.

Search for a contact

Page 36

Select a contact.

Confirm. The phone number defined as the default
number (

Page 114) is dialed.

g :

Open the context menu .

Select and confirm the required phone number using
the icons

[1]

. For information on the icons, see

Page 36.

Calling a contact from a group

Press the key shown until the "Personal" tab is active.

Select the option shown.

g :

Open the context menu .

Select and confirm the option shown.

Select the required group.

g :

Open the context menu .

Confirm.

Select group member.

Confirm. The phone number defined as the default
number (

Page 114) is dialed.

g :

Open the context menu .

Select and confirm the required phone number using
the icons

[1]

. For information on the icons, see

Page 36.

Niels, Bohr

Dial

[1] Pay attention to the notes on voice encryption

Page 126.

Options

Groups

VIP

View

Niels, Bohr

Dial

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Siemens OpenStage Key Module, Operation Manual, Page: 63 / 215

Search results

Summary of Contents for OpenStage Key Module

Reviews: