Siemens OpenStage Key Module Operation Manual Download Page 62

Page: 62 / 215

Step by step

Enhanced phone functions

Making calls

Making calls using DSS keys

Prerequisite:

DSS keys are configured on your phone

Page 24 and

Page 104.

Press the DSS key.

Lift the handset.

Press the key and enter speakerphone mode

[1]

Dialing a phone number from a list

For a detailed description of this function, see

Page 39.

Press the key until the call log you want is active.

Select and confirm the entry you want

[1]

[1] Pay attention to the notes on voice encryption

Page 126.

For information on the meanings of the LED dis-
plays of the DSS keys, see

Page 24.

If your phone belongs to an ONS group (parallel
call

Page 160), please note the following:

A call log is maintained for all phones in an ONS
group. The call log can be viewed by any internal
member of the ONS group with a system tele-
phone.

Niels, Bohr

18.10.

If the party listed is already in the personal
phonebook, the appropriate phone number icon
is displayed

Page 113.

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands