Getting to know your OpenStage phone
24
Programmable sensor keys
Your OpenStage 80/80 G has nine (OpenStage 60/60 G: eight) illuminated
sensor keys to which you can assign functions or numbers.
Depending on how they are programmed, you can use the sensor keys as:
•
Function keys
•
Repdial keys
Page 101 and
•
Direct station selection keys
Touch the key to activate the programmed function or dial the stored num-
ber.
Press and hold the function key to open a menu for programming it.
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
Increase the number of programmable sensor keys by connecting a
key module
Only for repdial keys can you also program the second level for di-
rect destination selection.
Your telephone can be configured so that direct station selection
keys cannot be set up, thus facilitating data and personal security.
Contact your service personnel should you have questions.
LED
Meaning of function key
S
Off
The function is deactivated.
T
Flashing
[1]
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
Indicates the function status.
R
On
The function is activated.
The programmable sensor keys on multi-line phones function as
trunk keys
