Siemens OpenStage Key Module Operation Manual Download Page 47

Page: 47 / 215

Basic functions

Step by step

Basic functions

Answering a call

If transmitted, calling party information (name, phone
number) appears on the graphic display.

Answering a call via the handset

The phone rings. The caller is displayed

[1]

Lift the handset.

if nec.

Set the call volume.

Answering a call via the loudspeaker

(speakerphone mode)

The phone rings. The caller is displayed

[1]

Press the key shown. The LED lights up.

The speakerphone function is activated.

if nec.

Set the call volume.

Please read the introductory chapters "Getting to
know your OpenStage phone"

Page 15

and

"Applications available on your OpenStage
phone"

Page 34

carefully before performing

any of the steps described here on your phone.

An incoming call will interrupt any ongoing tele-
phone setting operations. The phone automati-
cally returns to the point in the menu structure
where you were interrupted as soon as the call
ends.

[1] Pay attention to the notes on voice encryption

Page 126.

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands