Siemens OpenStage Key Module Operation Manual Download Page 58

Page: 58 / 215

Step by step

Basic functions

Responding to a callback request

Prerequisite:

You have received at least one callback

request

Page 41.

Press the key shown.

Information regarding the caller is displayed

Page 41.

Select and confirm until the required entry is displayed.

Select and confirm the option shown.

The party is called and the entry deleted from the list.

Checking/deleting a saved callback

Prerequisite:

You have saved callbacks

Page 57.

if nec.

Press the "Callback" programmed sensor key.

Open the idle menu

Page 30.

Select and confirm the option shown.
The newest entry is displayed first in the pop-up menu.

Select and confirm to display additional entries.

Deleting a displayed entry

Select and confirm the option shown.

Ending retrieval

Select and confirm the option shown.

Next entry?

Output?

Display callbacks?

Next callback?

Delete?

Cancel?

Summary of Contents for OpenStage Key Module
























































































































































































































Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands

Siemens OpenStage Key Module, Operation Manual

Search results

Summary of Contents for OpenStage Key Module

Reviews:

Related manuals for OpenStage Key Module

Brands by name

Popular brands