Maintenance and diagnostics
9
The NW8204 diagnostic tool
69
Building Technologies
A6V10854379_a_en
CPS Fire Safety
25.01.2019
Set Date Time
Open a window for setting date and time and download the new settings to the
RTC of NK8237.
Note:
This function is only available when logged in as user “admin”.
Setting date and time
NK Vitality
Open a window that display the current status of the NK8237 point image.
NW8204 Vitality window
The window can be updated manually by clicking the Refresh button.
You can use it to check if the status changes are sent correctly from NK8237 (for
example, from the tamper switch).
Read DLL Version
Read all the subsystems configured. It displays a dialog box with a list of the
configured subsystems organized by name, number, and creation date.
Read Kernel Version
Read the version of the Linux kernel installed on NK8237.
Read NK Version
Read the version of the installed NK8237 firmware (NK8237.EXE).
Read NK Date Time
Read current settings of date and time from the NK8237 RTC.
Read HW Conf. ID
Read the HW Configuration ID from the unit. The HW Configuration ID is used to
check the HW Configuration from a remote location:
⚫
Serial: NKA8001-A1 or NKA8001-A2 serial port add-on board installed.
Read Memory
Display the amount of RAM (in bytes) available on the NK8237.
Read Connected IP
Read the IP address of the last PC host that was connected to the selected port.
