Siemens NK8237 IEC 60870-5-104 Installation, Configuration And Commissioning Download Page 32

Page: 32 / 80

Software installation
Installation of Add-on distribution package

32
Building Technologies

A6V10854379_a_en

CPS Fire Safety

25.01.2019

8.3

Installation of Add-on distribution package

The NK8237 software for the IEC 60870-5-104 host support is distributed as an

add-on package, to be installed on the stations including the Composer tool (client-

only and FEP stations are therefore excluded) after the standard Composer Setup.
The package is named MM8000 MP4.81 - Addon N.10 (IEC GW - V.1.01) - CD

and is made up by an installation kit of a few files.

Installation kit

The installation kit includes:

⚫

Custom Folders: contains a NK8237 IEC default project. During the add-on

installation, the Project is copied to <

install directory

>\DMS8000\Sample

Projects.

⚫

New ST: contains the new Composer Subsystem Too for the IEC Master

station.

⚫

NK8237 Firmware: contains the firmware for the NK8237 units, such as, the

DLL module supporting the IEC protocol.

Installation kit

8.3.1

Installing the Add-on module

The following describes the installation procedure for the add-on module.

8.3.1.1

Installation

A specific application

–

the AddOns Manager

–

allows installing and updating the

add-on modules.
The following are the installation procedures for the add-on module.
1. Start the AddOns Manager.

- From the Windows Start menu, select the following:

Start > DMS8000 > Tools > AddOns Manager



The Add-on Manager window appears.

2. In the list of MM8000 Add-Ons/Name, select the name of the module you wish

to install

-- OR

–

(if the name of the add-on is not in the list on the screen):

click Browse, locate the installation files of the add-on module, and select the

text file (MM8000 - Extension Product Name.txt) in the root folder.

3. Click Install (or Update if a previous version was detected).

Summary of Contents for NK8237 IEC 60870-5-104

















































































Search results

Summary of Contents for NK8237 IEC 60870-5-104

Reviews:

Related manuals for NK8237 IEC 60870-5-104

Brands by name

Popular brands

Siemens NK8237 IEC 60870-5-104, Installation, Configuration And Commissioning

Search results

Summary of Contents for NK8237 IEC 60870-5-104

Reviews:

Related manuals for NK8237 IEC 60870-5-104

Brands by name

Popular brands