Siemens Mobile 750 Operating Manual Download Page 64

Page: 64 / 101

BIOS Setup

Docking menu - Configuring the MobiDock

A26391-K84-Z100-1-7619

Boot Hard Disk - Specifying hard disk for system load

This setting is only possible when the

Onboard IDE-Adapter

field in the

Advanced/Integrated

Peripheral

menu is set to

Auto

Primary

This field is used to specify which hard disk is to be treated as hard disk C:. This is the hard disk from
which the operating system is loaded.

Notebook

The operating system is loaded from the notebook's hard disk.

MobiDock

The operating system is started from the 1st MobiDock hard disk.

Integrated IDE Adapter - Setting the IDE Controller in the
MobiDock

This setting is only possible when the

Onboard IDE-Adapter

field in the

Advanced/Integrated

Peripheral

menu is set to

Auto

Primary

This field is used to enable or disable the IDE controller in the MobiDock.

Secondary

The IDE drives in the MobiDock are operated on the secondary IDE channel (IRQ15).

Disabled

The IDE controller in the MobiDock is disabled.

SCSI Controller - Setting the MobiDock SCSI controller

This field is used to enable or disable the SCSI controller in the MobiDock.

Enabled

The SCSI controller in the MobiDock is enabled.

Disabled

The SCSI controller in the MobiDock is disabled.

Docking Station Password is - Password display

This field is only available if the notebook is connected to a MobiDock. This field indicates whether
MobiDock access is controlled by means of a password.

Enabled

You have to enter the docking station password in order to access the MobiDock.

Disabled

You can access the MobiDock without having to enter a password

You should set a docking station password to prevent unauthorized access to the MobiDock.

Set Docking Station Password -Setting the
Docking Station Password

This field enables you to install the docking station password.

Summary of Contents for Mobile 750






































































































Search results

Summary of Contents for Mobile 750

Reviews:

Related manuals for Mobile 750

Brands by name

Popular brands

Siemens Mobile 750, Operating Manual

Search results

Summary of Contents for Mobile 750

Reviews:

Related manuals for Mobile 750

Brands by name

Popular brands