BIOS Setup
Advanced menu - Advanced system settings
54
A26391-K84-Z100-1-7619
PCI Devices - PCI configuration
This field calls the submenu to select the settings for the PC card controller and the PCI slots.
Phoenix BIOS Setup
Advanced
PCI Devices
Item Specific Help
Cardbus Controller Select: [External/Internal]
PCI IRQ line 1: [9]
PCI IRQ line 2: [9]
PCI IRQ line 3: [10]
F1 Help
↑↓
Select Item Space Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter
Select
²
Sub-Menu F10 Previous Values
Example for submenu
PCI Devices
i
If you use an operating system that does not support plug & play, you must select
No
for the
Plug&Play O/S
field in the
Advanced
menu to ensure that the PC card controller is switched
on by the system BIOS.
Cardbus Controller Select - Settings of the PC Card Controller
i
This setting is only effective when a QuickPort Plus or a QuickPort S is connected. If the
QuickPort is not connected, the controller in the notebook is always configured to the
compatible address 3E0h.
This field specifies the order of the CardBus controller
External/Internal
The controller in the QuickPort Plus/S is configured to the compatible address 3E0h. A
secondary address is assigned to the controller in the notebook.
Internal/External
The controller in the notebook is configured to the compatible address 3E0h. A
secondary address is assigned to the controller in the QuickPort Plus/S.
External only
The controller in the QuickPort Plus/S is configured to the compatible address 3E0h.
The controller of the notebook is disabled.
