Siemens Mobile 750 Operating Manual Download Page 31

Page: 31 / 101

Operating the Zip drive

Preparation for use and operation

A26391-K84-Z100-1-7619

Operating the Zip drive

Before the Zip drive can be used, you must install the Iomega software on your notebook. To do this,
use the Iomega installation disk provided and the Zip disk "Iomega Tools".

Installing the Iomega software

²²

Install the Zip drive in the right slide-in module.

²²

Connect the floppy disk drive to the parallel port (see "Connecting the floppy disk drive
externally".

²²

Supply the notebook with power via the power adapter.

²²

Switch on the notebook and start Windows.

²²

Insert the Iomega installation floppy disk in the floppy disk drive.

²²

Start the

a:\setup.exe

program from the Iomega installation disk with

Start - Run

(Windows 9x) or

File - Run

(Windows 3.1).

²²

Follow the instructions on the screen.

²²

Switch on the notebook again and start Windows.

²²

Insert the Zip disk "Iomega Tools" in the Zip drive.

²²

Follow the installation instructions displayed on the screen to finish the software installation.

Reinstalling the Iomega software from the Zip disk

If the Zip drive of your notebook has already been assigned a drive letter in

My Computer

or in the

File

Manager

, you can install the Iomega software directly from the Zip disk "Iomega Tools".

²²

Install the Zip drive.

²²

Switch on your notebook and start Windows.

²²

Insert the Zip disk "Iomega Tools" in the Zip drive.

²²

Open a search window for the Zip disk "Iomega Tools" with

My Computer

(Windows 9x).

²²

Double-click on

INSTALL.EXE

²²

Follow the installation instructions displayed on the screen to finish the software installation.

Summary of Contents for Mobile 750






































































































Search results

Summary of Contents for Mobile 750

Reviews:

Related manuals for Mobile 750

Brands by name

Popular brands

Siemens Mobile 750, Operating Manual

Search results

Summary of Contents for Mobile 750

Reviews:

Related manuals for Mobile 750

Brands by name

Popular brands