Siemens Mobile 750 Operating Manual Download Page 53

Page: 53 / 101

Advanced menu - Advanced system settings

BIOS Setup

A26391-K84-Z100-1-7619

Playback DMA Channel - DMA channel for playback

The DMA channel for playback can be set to various values.

DMA CH0, DMA CH1, DMA CH3

The DMA channel is set to the value displayed.

FM I/O - Base address for the FM synthesizer

The I/O address of the FM synthesizer can be set to different values.

388h, 390h, 398h, 3A0h

The I/O address is set to the value displayed.

MPU I/O - Base address for the MIDI interface

The I/O address of the MIDI port can be set to different values.

330h, 300h, 310h 320h

The I/O address is set to the value displayed.

Joystick - Joystick Port

The joystick port and be enabled and disabled.

Auto

The joystick is enabled and the configuration is automatically carried out.

Enabled

The joystick is enabled.

Disabled

The joystick is disabled.

FM I/O - Base address for the joystick

This field is only visible when the

Joystick

field is set to

enabled

200h, 201h

The joystick is enabled and set to the I/O address displayed.

QuickPort Audio - Audio options for QuickPort

The fields set the audio options for the QuickPort.

QuickPort Audio and the accompanying fields are only visible if the notebook is connected to
a QuickPort Plus or a QuickPort S.

Speaker - Selecting the loudspeaker

Notebook

The internal loudspeaker on the notebook is switched on.

QuickPort

Only the external loudspeakers connected to the QuickPort are switched on.

Microphone - Selecting the microphone

Notebook

The internal microphone on the notebook is switched on.

QuickPort

Only the external microphone connected to the QuickPort is switched on.

Summary of Contents for Mobile 750






































































































Search results

Summary of Contents for Mobile 750

Reviews:

Related manuals for Mobile 750

Brands by name

Popular brands

Siemens Mobile 750, Operating Manual

Search results

Summary of Contents for Mobile 750

Reviews:

Related manuals for Mobile 750

Brands by name

Popular brands