Operating the Zip drive
Preparation for use and operation
A26391-K84-Z100-1-7619
33
Inserting the Zip disk
²²
Switch on your notebook.
²²
Insert the Zip disk in the Zip drive.
The green drive indicator glows briefly and then goes out again.
i
Should the indicator continue to flash slowly, please press the eject button to remove the
Zip disk and then insert it again.
Sleep mode of drive
The Zip drive is equipped with an automatic sleep mode. This is intended to reduce the power
consumption, and thus to extend the operating time of the battery. In the sleep mode the speed of the
disk is automatically reduced after an adjustable, inactive time (e.g. 3 minutes). If the drive is
accessed, the speed of the disk is automatically increased again. The sleep mode time for the Zip drive
is controlled via the system settings of your notebook.
Removing the Zip disk
²²
Gently push the eject button.
The green drive indicator lights up. After a few seconds the Zip disk is then ejected.
²²
Please lay the Zip disk in the protective case after removing it from the drive.
i
When the notebook is switched off, the Zip drive automatically ejects the Zip disk.
